Top seller
No results were found for the filter!
NEW
POLY-PTX® Eco Smart Grinding Belt Roller 85 x...
Drive roller for the use of sanding belts up to 30 mm wide on POLY-PTX® and other longitudinal grinding machines with 19 mm spline shaft. Ideal for processing open and closed round tube structures. Features: Wear-resistant Vulculan with side thrust washers made of stainless steel and optimized Shore hardness. Grooved surface for better grip and slip-free work. Dimensions 85...
€76.49
*
TZ-Pyramid belt (Narrow) 9 x 533 mm
The absolutely uniform, pyramid-shaped grain structure ensures high material removal with a very fine grinding pattern. In this way, smaller scratches and spot welds are removed at the same time and the surface is smoothed in record time. This saves working time and work steps. The grinding temperature is also reduced compared to conventional abrasives. The TZ pyramid...
€1.59
*
POLY-PTX TZ-Pyramid belt 30 x 600 mm
The absolutely uniform, pyramid-shaped grain structure ensures high material removal with a very fine grinding pattern. In this way, smaller scratches and spot welds are removed at the same time and the surface is smoothed in record time. This saves working time and work steps. The grinding temperature is also reduced compared to conventional abrasives. The TZ pyramid...
€3.88
*
TZ-Pyramid belt 30 x 533 mm
The absolutely uniform, pyramid-shaped grain structure ensures high material removal with a very fine grinding pattern. In this way, smaller scratches and spot welds are removed at the same time and the surface is smoothed in record time. This saves working time and work steps. The grinding temperature is also reduced compared to conventional abrasives. The TZ pyramid...
€4.00
*
TZ-Pyramid Band belt 40 x 780 mm
The absolutely uniform, pyramid-shaped grain structure ensures high material removal with a very fine grinding pattern. In this way, smaller scratches and spot welds are removed at the same time and the surface is smoothed in record time. This saves working time and work steps. The grinding temperature is also reduced compared to conventional abrasives. The TZ pyramid...
€7.03
*
Grinding belt drive roller with M14 thread
Belt drive roller made of wear-resistant, soft, grooved Vulculan plastic for better grip and slip-free work with stainless steel stop washers on the side. Features: Dimensions Ø 85 x 70 mm. M14 thread mount. Maximum speed 6,500 rpm. Wear-resistant Vulculan with side thrust washers made of stainless steel and optimized Shore hardness. With vibration-damping sleeve for 100%...
€80.08
*
Corundum grinding belt (Narrow)
Elastically flexed grinding belt made of high-grade corundum for a wide range of sanding work, even on tight radii, such as rough sanding, pre-sanding, descaling, rust removal and smoothing. Features: Dimensions 9 x 533 mm and 5 x 533 mm. Corundum fabric for a consistent finish and a long service life. Tear-proof thanks to reinforced back fabric. Extra stable glue point....
From €0.90
*
Trizact™ belt (Narrow) 9 x 533 mm
Saves several work steps thanks to high material removal with a very fine grinding pattern and simultaneous removal of scratches and welding points. The ideal start for a later mirror finish polishing. Leaves behind the slightest roughness. Features: Dimensions 9 x 533 mm. Abrasive cloth with pyramid-shaped grain structure and additional heat-insulating layer. Suitable for...
€2.00
*
Felt belt (Narrow) 9 x 533 mm
First-class merino felt belt for the main polishing up to a mirror finish of VA and non-ferrous metals, can be used on both sides. Also suitable for hard plastics. Features: Merino felt material. Dimensions 9 x 533 mm. Material thickness 5 mm. Suitable for BAND-IT, BAND-IT AKKU. Note: Always use an extra felt band for each paste and cream so as not to mix different grains....
€5.08
*
SuperPolish polishing belt 30 x 533 mm
Revolutionary special fleece. In combination with polishing pastes and creams, achieves a brilliant mirror finish on VA and non-ferrous metals without streaks and shadows. Features: Polishing fleece material. Material thickness 5 mm. Dimensions 30 x 533 mm. Extra stable glue point. Suitable for PIPE MAX HT MINI, PIPE MAX AKKU. Note: Always use an extra SuperPolish tape for...
€7.62
*
BRIGHTEX polishing belt 30 x 533 mm
The polishing material already pre-soaked with BRIGHTEX® polishing paste gives untreated metal a shadow-free mirror shine and makes the annoying and time-consuming application of pastes and creams superfluous. Step 1: Top high gloss thanks to BRIGHTEX® Berry polishing paste, even through the oxide layers that are still present. Step 2: Mirror finish almost like chrome-plated...
From €8.20
*
POLY-PTX corundum grinding belt 30 x 600 mm
Elastically flexed grinding belt made of high-grade corundum for versatile sanding work even on tight radii. For rough grinding, pre-grinding, descaling, derusting and smoothing of round tubes. Features: Dimensions 30 x 600 mm. Corundum fabric for a consistent finish and a long service life. Tear-proof thanks to reinforced back fabric. Extra stable glue point. Resealable...
€1.86
*
Viewed